WORK EXPERIENCE

01/08/2016–Present
Lead Systems Engineer – R&D Product Development

Roche Diagnostics , Kornwestheim, Germany
? Driving the technical development of the project ensuring that the system meets the customer’s needs
? Establishing and maintaining the Systems Engineering Plan
? Leading the concept definition and the break-down to the component structure
? Coordinate the systems engineering activities between all components and safeguard technical consistency and completeness during the execution of the project
?Leading the interface management between the components as well as to connected products
? Ensuring the domain knowledge transfer to Systems Engineers and project team
? Ensuring all the Systems and development are comply to the norms FDA, IVDD, MDD, cGMP, ISO 14971,ISO 60601, IEC 62304, EU Medical Device Directive 93/42/E and EU Medical Device Regulation US-FDA Regulations)

01/10/2014–31/7/2016
Project Manager | Requirements Manager |Sr. Systems Engineer| Business Analyst

RECARO AIRCRAFT SEATING GmbH, Schwäbisch Hall (Germany)

?Responsibility of the theme " Requirements Management and R&D Quality " as a Single Point of Contact (SPC ) for our customers (Airbus, Boeing..), national and international aviation authorities, national and international legislation and institutions for all the requirements of our business
? Ensuring the Compliance with the EASA Part 21 and CS/JAR/FAA certification /LBA requirements (Part M, Part 145, Part 21 and Air Ops))
? Support for deriving the Seat (Mechanical and Electrical Actuators, Power supply, Electronics and IFE) SW/HW -Requirements
? Ensuring traceability between System, Software and Module requirements and between Requirement s and Test
? Ensuring the completeness, understandability, feasibility and traceability of Requirements
? Responsibility for the System Requirements of the SEAT System
? Optimization and lead time reduction in preparation of specifications (Customer and Supplier)
? Lean methods and process implementation in Requirements Management
? Support for requisitioning clarification involving all required departments
? Ensuring Requirements Analysis and Requirements – Reviews(Change Control Board )
? Support for the concept creation with customers and suppliers
? Compliance with the related Product development schedules and milestones

Tools Used: DOORS Requirements Management Tool, SPICE, Qlik view, Jira and Mantis- Project Management Tools, Product Life Cycle Management software – Polarion ALM , Quality Management Methods, Programming languages: DXL, Configuration Control tool –MKS

01/09/2013-30/09/2014
Systems Engineer | Business Analyst (Process and Requirements Management)

RECARO AIRCRAFT SEATING GmbH for SII Deutschland GmbH, Schwäbisch Hall (Germany)

?Responsibility of the theme " Requirements Management and R&D Quality " as a Single Point of Contact (SPC ) for our customers (Airbus, Boeing..), national and international aviation authorities, national and international legislation and institutions for all the requirements of our business
? Support for deriving the SW/HW -Requirements of the SEAT Systems
? Ensuring traceability between System, Software and Module requirements and between Requirement s and Test
? Ensuring the completeness, understandability, feasibility and traceability of Requirements
? Responsibility for the System Requirements of the SEAT System
? Optimization and lead time reduction in preparation of specifications (Customer and Supplier)
? Lean methods and process implementation in Requirements Management
? Support for requisitioning clarification involving all required departments
? Ensuring Requirements Analysis and Requirements – Reviews(Change Control Board )
? Support for the concept creation with customers and suppliers
? Compliance with the related Product development schedules and milestones

Tools Used: DOORS Requirements Management Tool, SPICE, Qlik view, Jira and Mantis- Project Management Tools, Product Life Cycle Management software – Polarion ALM , Quality Management Methods, Programming languages: DXL, Configuration Control tool –MKS

01/04/2013–31/08/2013
System Architect and Requirements Management (Business Analyst)

Altran Co.KG GmbH /Continental - Corporation, Kemptener Strasse 99, Lindau (Germany)

?Main activities : LIDAR Systems ( Laser Detection and Ranging), System Safety, ISO 26262, IEC 61508, Optical Systems, ADAS (Advanced Driver Assistance Systems), System Engineering, System Test, V&V, Requirements Management.
?Responsibilities :Execution of the process for developing the infrared sensor architecture products
Definition of Sensor-/System-Architecture based on customer requirements,
?Functional requirements regarding safety as well as performance, cost and quality objectives
Responsible for the documentation of the system architecture
? Responsibility for the execution and consistency of requirements management
? Responsibility for the execution and consistency of the FMEA for design and system at the sensor level
? Guide the process of Sensor-/System-Integration and integration testing
? Responsibility for meeting the requirements for product implementation and the achievement of the requirements

01/07/2012–31/03/2013
Electrical Systems Engineer (Qualification/ Testing ( EMC/ EMI))

Altran Co.KG GmbH / LIEBHERR AEROSPACE, Lindenberg im Allgäu 88161, Pfänderstraße 52 (Germany)

Project 1: Agusta Westland 189 Commercial H/C & Embraer 175/179 E Jets Family
? EMC/ EMI Qualification testing for the Landing Gear Equipment and writing Qualification test procedures and test reports.
? DO 160 G (Environmental Qualifications)/ MIL standards environmental Qualification for the Avionic Equipments.
? Supporting the System and Hardware development for Qualification planning and testing activities
? Review of qualification methods and procedures used for the detection of CS-29 requirements
? EMC testing such as Vibration, Power input, RF, Lightening direct and indirect effects, Crash and Shock Safety, Temperature, Temperature Variation, Humidity, HIRF requirements.

01/02/2012–30/06/2012
Electrical Systems Integration Engineer

Altran Co.KG GmbH / Airbus Helicopters(Eurocopter) GmbH, Industriestraße 4, 86609 Donauwörth (Germany) (Germany)

? Avionics, Systems Engineering, Requirements Engineering.
? Cockpit Integrated Global Avionics for Light and Medium Helicopters EC ( Eurocopter) 145 T2 Avionics Systems Integration
? Vehicle management Systems of Helicopters( Fuel, FLI, Engine Monitoring, Hydraulics, ECS, Rotor monitoring)
? Multifunctional display Systems and Systems Test
? HW/ SW Systems Integration, Requirements Analysis and Engineering Judgement for Requirements which are not covered with Test Procedures.
? Tools Used: DTS (Development Test Systems), DataSIMs, ARTIST (Avionics Testing and Simulation Tool), dSPACE Engine Simulator ( Automation Tool), DOORS, Scripting Languages, ARINC 429, RS422

01/07/2011–31/01/2012
Electrical Systems Engineer

Aeroconseil GmbH / Diehl Aerospace GmbH, Alte Nussdorf 23, 88662 Überlingen (Germany)

? Avionics, Systems Engineering, Requirements Engineering.
? Integrated Modular Avionics (IMA) Airbus 350XWB CRDC.
? Analysis of Operational Requirements.
? Defining System concepts and architectures and Equipment Requirements.
? Establishing integration and V& V Concepts.

01/12/2010–30/06/2011
Electrical Systems Engineer

Aeroconseil GmbH / Diehl Aerospace GmbH, Alte Nussdorf 23, 88662 Überlingen (Germany)

? Establishment (Definition & Analysis) of the guaranteed information Provided to the users (Airbus).
? Describing the Software/Hardware functional Requirements and Performance Requirements.
? Identifying the implementation of these rules by support from System level, HW level, SW level, Verification and Validation level.
? Involved in preparation of Validation reports needed for certification purpose and in System and SW level testing activities.
? Gained knowledge in AFDX network, CAN, ARINC 653, ARINC 429.
? Clear Case, Verification and Validation of Requirements.

01/02/2010–30/07/2010
Systems Engineer (Diplomarbeit/Master Thesis)

Airbus Group (EADS Innovation Works), Neißpriel 1, 21129 Hamburg (Germany)

? Integrated Modular Avionics (IMA) Airbus 380 Architecture development.
? Evaluate the application of the Requirements Specification Language developed by the CESAR (Cost-Effective Methods and Processes for Safety-Critical Embedded Systems): Ongoing research project funded by the European Commission project.
? Requirement Analysis process and creation of new System concepts and Architectures.
? Formalizing requirements on the example of a realistic Aeronautic case study.
? Develop and introduce a standardized Requirements Specification Language aiming to support the definition of formalized requirements.
? Research works of IO mapping in the in the Architecture of Integrated Modular Avionics (cRDC (Common Remote Data Concentrators), CPIOM (Core Processing Input/output Module)) and Requirement Engineering works.

10/08/2009–11/11/2009
IT professional ( Internship/ praktikum)

EUROP STAR Aircraft GmbH, Alleegasse 37, 9020 Klagenfurt (Austria)

11/09/2007–08/04/2008
Teaching Assistant

HITAM Engineering College, Hyderabad, India

EDUCATION AND TRAINING

01/10/2008–01/06/2011
Master of Science ( Embedded Systems and Signal Processing Architecture)

University of Klagenfurt, 9020 Klagenfurt (Austria)

Embedded Systems, Sensor Systems, Digital Control, Digital Signal processing, Control systems, Process Automation, Optimal control, Mobile and Wireless communications, Signal Processing Architectures, Pervasive Computing, Telematics

15/07/2003–06/06/2007
Bachelor of Technology ( Electrical and Electronics Communication Engineering)

Jawaharlal Nehru University of Technology, Hyderabad (India)

Electronics and, Electrical technology , Control Systems, Radar Engineering, Satellite Communication, Electronic Measurements and Instrumentation, Micro controllers and Microprocessors, Digital Image processing, Digital signal Processing